Sound Blaster AWE32

CT2760 Rev 3

Sound Blaster AWE32 is a 16-bit audio board that provides you with CD quality sound for your PC. This card comes equiped with Panasonic/MKE, Mitsumi, and Sony CD-ROM interfaces and an EMU8000 AWE Synthesizer chip. It provides an option to upgrade with a Wave Blaster II, allowing you to experience the world of multimedia.

General
Hardware Settings
External Connectors

GENERAL

FM Synthesis: Yes
Wave Synthesis: Yes
Built-In Stereo Power Amplifier: Yes
Built-In Digital/Analog Mixer: Yes
Plug and Play: No
CD-ROM Interface: Panasonic/MKE, Sony, Mitsumi

HARDWARE SETTINGS

Default settings are shown in [brackets]

Interrupt (IRQ): 2, [5], 7, 10
8-bit DMA Channel: 0, [1], 3
16-bit DMA Channel: [5], 6, 7

Joystick I/O Address: 200 Hex

 Joystick:    [Enabled]    Disabled
 JYEN             ON         OFF

Audio I/O Address: [220], 240, 260, 280 Hex

 ADDRESS: [220]    240     260     280
 IOS0      ON      OFF     ON      OFF
 IOS1      ON      ON      OFF     OFF

MPU-401 I/O Address: 300, [330] Hex

 Port address:  300    [330]
 MSEL           OFF     ON

MPU-401 [Enabled] (MFBEN closed), Disabled (MFBEN open)
FM Synthesizer I/O Address: 388 Hex
Wave Synthesizer I/O Address: 6x0, Ax0, Ex0 Hex
Extra DRAM Present Enabled (DRAM_EN on 1 & 2), [Disabled] (DRAM_EN on 2 & 3)

CSP Chip Installed (enabled on CT2760)

 CSP Chip:       Enabled    Disabled
 IFSD, APSD        Off         On

EEPROM jumper enables/disables the CDROM interface settings, set with the CONFIGCD.EXE utility

EXTERNAL CONNECTORS

Line-In: Yes
Mic-In: Yes
Line-Out: Yes
Speaker-Out: Yes
PC Speaker-In: Yes
SPDIF: Yes
Game/Joystick Port: Yes
CD-ROM Audio-In (SB Audio Socket): Yes
CD-ROM Audio-In (MPC2 Socket): No
SIMM RAM Upgrade Module: Yes (512k on-board RAM)
CSP Chip Socket: CSP chip built-in
Wave Blaster Daughter Board Connector: Yes
External CD-ROM: Not Applicable
Modem Feature Connector: Not Applicable