Installating Graphics Blaster MA20x Driver in OS/2 WARP

The drivers for the MA20x are stored in the OS2 directory of the Installation CDROM.

There are 2 ways of installing the drivers.

From CDROM

1. Open an OS2 Window and run the setup.cmd batch file in the CDROM's OS2 directory by typing the following

D:\OS2\SETUP D:\OS2 C:

where D: is the CDROM drive and C: is the drive where OS/2 is installed.

2. Restart the system as instructed and run the Display Driver Install icon to continue with driver installation.

From Diskette

Copy all the files in the CDROM's OS2 directory onto a formatted diskette with the volume label CIRRUS 1
Open an OS2 Window and run the setup.cmd batch file from the diskette by typing the following :

A:SETUP A: C:
where A: is the diskette drive and C: is where OS2 is installed.
Restart the system as instructed and run the Display Driver Install icon to continue with driver installation.

IMPORTANT: Make sure the diskette is volume labeled CIRRUS 1