Modem Blaster 14.4

CTC5030

In additional to traditional fax/modem functionality, Modem Blaster 14.4 proved the latest in telegaming, internet access and online services. Play the hottest game titles modem-to-modem, browse the web, send and receive E-mail, and participate in interactive on-line forums from virtually anywhere in the world.

• General
• Hardware Specifications
• Hardware Settings
• External Connectors

GENERAL

• System Requirements:
  • IBM PC 386SX and higher or 100% compatibles
  • EGA or VGA card (VGA recommended)
  • 4 MB system memory (8 MB recommended)
  • MS DOS 3.3 or higher
  • Windows 3.1 or higher
• Computer Bus Size: 16 bits
• FCC Class B Approval

HARDWARE SPECIFICATIONS

• Data Mode
  • Data throughput up to 57.6 kbps
  • Supports CCITT V.32 bis, V.32, V.22bis, V.22 and V.21
    • 14400, 12000, 9600, 7200, 4800, 2400, 1200, 300 bps
  • Supports Bell 212A and 103J
    • 1200, 300 bps
  • V.42 bis and MNP5 data compression
  • V.42 and MNP 2-4 error correction
• Fax Mode
  • Supports CCITT V.17, V.29 and V.27ter
    • 14400, 12000, 9600, 7200, 4800, 2400 bps
• Command Mode
  • Hayes standard and extended AT command set
  • Class 1 fax commands and connect with Group 3 fax machines
• Speakerphone Mode
  • Asynchronous dial
  • Full-duplex speakerphone
  • Auto dialing-up and answering mode
  • Speaker volume control and muting
  • Automatic rate negotiation and tone/pulse dialing

HARDWARE SETTINGS

• Modem Interrupt (IRQ): 3, 4, 10, 11
• Modem Address:
  • 3F8 Hex (COM 1)
  • 2F8 Hex (COM 2)
  • 3E8 Hex (COM 3)
  • 2E8 Hex (COM 4)

EXTERNAL CONNECTORS

• 16550 UART Interface