- Interrupt (IRQ): 2, [5], 7, 10
- 8-bit DMA Channel: 0, [1], 3
- 16-bit DMA Channel: [5], 6, 7
- Joystick I/O Address: 200 Hex
Joystick: [Enabled] Disabled
JYEN ON OFF
- Audio I/O Address: [220], 240, 260, 280 Hex
ADDRESS: [220] 240 260 280
IOS0 ON OFF ON OFF
IOS1 ON ON OFF OFF
- MPU-401 I/O Address: 300, [330] Hex
Port address: 300 [330]
MSEL OFF ON
- MPU-401 [Enabled] (MPUEN closed), Disabled (MPUEN open)
- FM Synthesizer I/O Address: 388 Hex
- Wave Synthesizer I/O Address: 6x0, Ax0, Ex0 Hex
- Extra DRAM Present Enabled (DRAM_EN on 1 & 2), [Disabled] (DRAM_EN on 2 & 3)
- CSP Chip Installed (enabled on CT2760)
CSP Chip: Enabled Disabled
IFSD, APSD Off On
- Mitsumi CD-ROM interface address: 310, 320, [340], 350
Port address: 310 320 [340] 350
CD0 ON OFF ON OFF
CD1 ON ON OFF OFF
- Mitsumi CD-ROM interface IRQ: 3 10 [11]
- Mitsumi CD-ROM interface DMA: 6 [7]
Mitsumi DMA: 6 [7]
DRQ7 OFF ON
DRQ6 ON OFF
- There is also a jumper in the lower left corner of the
card that is used to select the type of CD ROM drive that is used.
The 'Other' setting disables the interfaces.