Modem Blaster 19.2 Voice

CTC5010

Modem Blaster 19.2 Voice is a software upgradeable internal PC modem that supports all of the high-performance data, fax and voice needs of a small business or home office. Designed with exclusive DSP SoftModem Technology, Modem Blaster 19.2 Voice integrates all your telephony functions on a single line and provides upgrade advantages to future enhancements and changes..

• General
• Hardware Specifications
• Hardware Settings
• External Connectors

GENERAL

• System Requirements:
  • IBM PC /XT, AT, 386 and higher or 100% compatibles
  • EGA or VGA card (VGA recommended)
  • 4 MB system memory (8 MB recommended)
  • MS DOS 3.3 or higher
  • Windows 3.1 or higher

HARDWARE SPECIFICATIONS

• Data Mode
  • Data throughput up to 115.2 kbps
  • Support CCITT V.32terbo, V.32 bis, V.32, V.22bis and V.22
    • 19200, 14400, 12000, 9600, 7200, 4800, 2400, 1200 bps
  • Supports Bell 212A and 103J
    • 1200, 300 bps
  • V.42 bis and MNP Class 5 data compression
  • V.42 (LAPM) and MNP Class 4 error correction
• Fax Mode
  • Supports CCITT V.17, V.29 and V.27ter
    • 14400, 12000, 9600, 7200, 4800, 2400 bps
• Command Mode
  • Hayes standard and extended AT command set
  • Class 1 fax commands and connect with Group 3 fax machines
• Operational Mode
  • Asynchronous full duplex
  • Dial-up, tone/pulse dialing
  • Automatic speed negotiation
  • Dial tone, busy, ring back and modem answering tones

HARDWARE SETTINGS

• Modem Interrupt (IRQ): 3, 4, 5, 9
• Modem Address:
  • 3F8 Hex (COM 1)
  • 2F8 Hex (COM 2)
  • 3E8 Hex (COM 3)
  • 2E8 Hex (COM 4)

EXTERNAL CONNECTORS

• 16550 UART compatible