*****************************************************
		 *                README for Utility                 *
		 *             Quantum Designs (HK) LTD.             *
		 *                      1998.7.20                    *
		 *****************************************************

This directory includes three files:

V1.0 FLASH.EXE -----The program can flash the BIOS into the M/B
V1.4 CBLOGO.EXE -------The LOGOeasy utility
V1.0 LF.EXE------------The low level format utility

To upgrade BIOS, please find it from our WebSite http://www.qdigrp.com.

1. How to use FLASH.EXE:

This is a flash memory write/read utility.
IMPORTANT NOTE:
   The FLASH utility could not correctly run in windows (virtual 8086)
   MS-DOS mode. It must be proceeded with the following steps:
      1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
        from the dos prompt under DOS6.XX or WINDOWS9X environment.
      2.Boot system with diskette.
      3.Then run the FLASH utility.
Usage:
      FLASH [BIOSfile] [/c[<command...>]][/n]
      FLASH [BIOSfile] [/g]
/c: Flash memory will clear previous settings. Default allows settings to
    remain. <command> function definition:
      c: clear CMOS [Default];        p: clear PnP;
      d: clear DMI.
/n: Program BIOS without prompting. If this option is chosen:
      Be sure your new BIOS is compatible with your MB. If not, the system
      are damaged.
/g: Get BIOSfile from BIOS ROM.
Examples:
      A:\BIOS\FLASH.EXE BIOSfile.bin
      A:\BIOS\FLASH.EXE BIOSfile.bin /cdpc/n
      A:\BIOS\FLASH.EXE BIOSfile.bin /g

Warning: 
   Avoid power-off incidently in upgrading procedure, or system would fail
   to reboot!

2. How to use CBLOGO.EXE and LF.EXE

Please refer to the help in the program.